Instr 9928789
Rev 01 2018-07
Page 13 of 19
4. Install retained lock assembly
D
to new lid with
two retained screws
H
and handle
J
from lid.
Pressed retained 12V outlet
G
into lid.
(12V
outlet in RH Saddlebag only.)
Torque lock
assembly screws to specification.
TORQUE
65 in. lbs. (7.5 Nm)
5. Repeat this section for opposite side saddlebag
lid.
CHIEFTAIN
®
SPEAKER AND SPEAKER GRILL
INSTALLATION
These steps apply to both Left and Right Saddlebag
lids except as noted. Only RH lid shown.
1. Apply RTV to speaker fastener holes (shown
with arrows) in saddlebag lid
w
.
2. Wipe excess RTV from surface.
3. Insert speaker
w
(from
6.5 inch Speaker and
Amplifier Kit PN 2883922
) into lid opening with
speaker connector in basket opening as shown
with arrow. Secure speaker with four screws
e
(from
Saddlebag Lid Kit PN 2883666)
. Torque
screws to specification.
TORQUE
20 in. lbs. (2.25 Nm)
4. Clean any excess RTV from speaker.
5. Insert five rubber washers
r
(from
Speaker Grill
Kit PN 2883665
) into openings in lid. Ensure
washers are fully inserted into openings. Set and
hold speaker grill
w
(from
Speaker Grill Kit PN
2883665
) in place with one hand and open
saddlebag lid continuing to hold grill in place
for next step.
