MMP-1: INSTALLATION & OPERATION MANUAL
PAGE 4
WHAT’S IN THE BOX
1x JST3 to XLRF line input cable (300mm length)
1x JST3 to XLRM line output cable (300mm length)
1x RJ45 to XLRM cable (1 metre length)
1x PoE injector power supply with power cable
1x MMP-1 wall plate
1x The manual you are reading
INSTALLING YOUR MMP-1
Mounting your MMP-1 control panel is very easy. The MMP-1’s plastic fascia is based on Clipsal 2000 style
mountings. The MMP-1 is compatible with all Clipsal 2000 style mounting accessories, such as C-Clips and
standoff boxes.
Follow the appropriate instructions for the chosen installation accessory for the installation of your MMP-1.
The MMP-1 mounts in exactly the same way as a standard Australian/NZ mains outlet or light switch.
FRONT PANEL CONTROLS
1. : This button allows volume of playback audio to be increased.
2. VOLUME - : This button allows volume of playback audio to be decreased.
3. MODE: This button selects between different input source modes. As this button is pressed the MODE LED
will cycle Blue, Pink, or Red in colour.
MODE LED BLUE – BT Streaming Mode: In this mode the MMP-1 will accept BT streaming connections from
mobile and other BT streaming devices. Please see pairing section on page 6 for paring instructions.
*Note:
Only one BT device can be connected at one time. To connect a different BT device to the MMP-
1 please see paring section.
1
2
3
4
5
6
7
8
9
10
Содержание MMP-1
Страница 1: ......
