inDESIGN MMP-1, Руководство по установке и эксплуатации

Страница: 9 / 12

MMP-1: INSTALLATION & OPERATION MANUAL PAGE 9
POE Power and Audio over shielded UTP Connection
This connection method allows users to power the MMP-1 via the included PoE power supply and route
balanced audio from the MMP-1 via the PoE power supply to a remote balanced line input.
POE Power and Audio via Tail connection
This connection method allows users to power the MMP-1 via the PoE power supply over network cable and
use the balanced LINE output on the rear panel to connect to a local (in room) balanced line input.
1. RJ45 to RJ45 shielded connectors. Use CAT6A network cable. Max length 100m
2. PoE Power Supply (included)
3. RJ45-LAN-XLR Male Patch Cable (included)
4. Balanced line input of a mixer, mixer amplifier, amplifier or powered speaker
*Note: in this configuration the balanced line output on the rear of the MMP-1 should not be used.
1. RJ45 to RJ45 shielded connectors. Use CAT6A network cable. Max length 100m
2. PoE Power Supply (included)
3. JST3-XLR Male cable (included)
4. Balanced line input of a mixer, mixer amplifier, amplifier or powered speaker
*Note: in this configuration the balanced line output of the PoE power supply should not be used.
1 3
2
1 3
2
4
4