inDESIGN MMP-1, Руководство по установке и эксплуатации

Страница: 8 / 12

MMP-1: INSTALLATION & OPERATION MANUAL PAGE 8
The MMP-1 can be connected in different ways to various audio devices.
Please note the MMP-1 is designed to work using only one output connection at a time. Please see page 9.
*Note: Connecting multiple inputs and outputs and the same time could cause damage to the MMP-1, or
other connected equipment.
Cable Type
As power and audio travel along the same cable from the MMP1 - through the PoE power supply to other
devices, the category network cable connected between the MMP-1 and all devices must be of a high
quality.
A shielded category network cable with shielded RJ45 terminations must be used.
*Note: The minimum network category cable type requirement is CAT6A. The Length of cable must not
exceed 100 metres between the MMP-1 and PoE power supply. Cables must be terminated with shielded
RJ45 connectors in T-568B standard.
CONNECTING YOUR MMP-1
RJ45 PIN CONDUCTOR FUNCTION CAT 6A CONDUCTOR COLOUR
1 Balanced audio + White + Orange
2 Balanced audio - Orange
3 White + Green
4 V 24V Blue
5 V 24V White + Blue
6 Green
7 Vsupply - 24V White + Brown
8 Vsupply - 24V Brown
Connector Screen Audio Ground Screen / Braid