![Incredible Technologies Golden Tee 2017 Скачать руководство пользователя страница 21](http://html.mh-extra.com/html/incredible-technologies/golden-tee-2017/golden-tee-2017_installation-manual-and-users-manual_2051205021.webp)
Golden Tee LIVE™
Version 9/16
Page 17
© Copyright Incredible Technologies, Inc. All Rights Reserved. Unauthorized duplication is a violation of applicable law.
All other marks are the properties of their respective owners. All rights reserved.
Scissors
Tape Measure
Putty Knife
Decal Roller/Squeegee
Liquid Window Cleaner & Cleaning Cloth
Vacuum Cleaner
Any tools needed to remove parts from your existing cabinet not listed above.
INSTALLATION PREPARATION
BEFORE YOU START…
Before you install the Golden Tee LIVE kit into your cabinet there are a few things you should check first:
1. Check to make sure your existing cabinet's monitor, speakers, AC power cord, lights, bill acceptor and coin
mechanisms work.
Replace or repair where necessary.
2. Check to make sure all the necessary parts are included in your kit.
If any are missing/damaged please contact IT’s Technical Support at 847-870-7027 x121.
3. Check to make sure cabinet is wired with standard earth grounded AC plug compatible with local building
codes and/or safety requirements.
If not, have a qualified electrician install one (not provided).
4. Have all the necessary tools available to install this kit.
Refer to the recommended tools list to make sure you are prepared before you start.
5. Make sure any parts of the system (lights, monitor, etc.) are not plugged in.
Working with any part of the system plugged in or powered on can be dangerous.
6. Keep in mind that it's been proven that the higher quality of work put into a kit installation results in a higher
earning game.
Make sure you have plenty of space, time, and focus to put into this kit installation.
PREPARING THE CABINET
CABINET SELECTION
You can choose either a new cabinet or a used cabinet for your Golden Tee LIVE game. In either case, you will
need: Speakers and a HDTV monitor capable of at least 720p resolution. See HDTV DIP Switch Settings and
Nighthawk System Box for more details.
PREPARING THE CABINET FOR INSTALLATION
Follow these steps to prepare your cabinet before installation:
1. Remove the following from the cabinet: Main Logic Board(s) (and hard drive if present), Control Panel,
Monitor Viewing Glass, Power Supply and JAMMA Cable Harness. The I/O Board in this kit does
not
have a
JAMMA connector but instead uses an Input/Output Connections Cable.
2. Thoroughly clean out your cabinet. Replace wiring from the I/O Board with the Input/Output Connections
Cable.
CHECK HARNESS AND WIRING
The Golden Tee LIVE Kit can easily interface with any Golden Tee LIVE showpiece cabinet. If your current
cabinet is equipped with a standard JAMMA cable, the JAMMA cable assembly will need to be removed and
replaced with the Input/Output Connections Cable included with the kit. Make sure your existing wires and
connectors are in good working order. Check the pin out chart in Appendix B and the wiring diagram in Appendix
D for harness connections.
CHECK COIN MECHANISMS AND BILL ACCEPTOR
Make sure your coin mechanisms and bill acceptor are functioning properly, and your coin box and stacker are in
good condition. You want to make sure your game will accept money when players are ready to play.