Golden Tee LIVE™
Version 9/16
Page 11
© Copyright Incredible Technologies, Inc. All Rights Reserved. Unauthorized duplication is a violation of applicable law.
All other marks are the properties of their respective owners. All rights reserved.
SHOWPIECE CABINET UPDATE & REPAIR
PROCEDURES
KEYPAD
Newer IT cabinets have the ability to register players through a keypad box attached at the back or to the side of
the cabinet. For details on installing the Keypad, see the Keypad Installation Guide under Golden Tee LIVE 2017
on the IT web site:
http://amusement.itsgames.com/service/manuals
SYSTEM BOX
The Nighthawk System Box houses most of the game electronics and hardware in one box that can be easily
installed. As with all electronic equipment, the system box should be handled with extreme care. Shock, severe
temperature, or sudden impacts can damage the internal components that require costly repair.
Note: Turn off power to the cabinet and remove the power cord from the back of the cabinet when performing any of the
following.
System Box Removal
1. Unlock the control panel and open to expose the Nighthawk
system box.
2. Disconnect all connections to the system box. Be sure all wires
and connectors are clear and out of the way. Label the
connectors for easy reconnection.
3. Loosen the 6 ¼" hex-head screws that secure the system box.
4. Carefully lift the system box off the screws and up out of the
cabinet.
System Box Installation
1. Unlock the control panel and open to expose the inside of the
cabinet.
2. Align the system box onto the 6 mounting screws of the internal
slanted panel. The connection ports face up. Once the system
box is in place, tighten the 6 ¼" hex-head screws to secure the
box to the panel.
3. Connect the required connections. See the Connections
Diagram for more details.
I/O BOARD
Note: The I/O Board is game title specific and is not interchangeable with other game titles produced by Incredible
Technologies on this system. Dedicated and Retrofit Kit I/O Boards are different and are not interchangeable.
I/O Board Removal
First, unlock the control panel and open to expose the interior of the Showpiece cabinet. Disconnect all
connections from the I/O Board. Label the connectors for easy reconnection and move them safely out of the
way. Next, remove the six ¼” wood screws that secure the board to the interior left side of the cabinet (as you
face the game). Carefully remove the I/O Board from the cabinet.
I/O Board Installation
Place the I/O Board in the proper location on the interior left side of the cabinet (as you face the control panel of
the game). Be sure it is oriented properly so the cables reach the board (the USB port on the I/O Board facing the
top of the cabinet). Secure the I/O Board to the side of the cabinet with the six ¼” wood screws. Use the factory
mounting holes if at all possible. Be sure the board does not “bow” or is not stressed in any way. Once mounted,
connect the appropriate connections.