background image

Big Buck Hunter™

                            

           

Page 16

                                                                           

Version 01/05

 

© Copyright 2004-2005 Incredible Technologies, Inc.  All Rights Reserved.  Unauthorized duplication is a violation of applicable law. 

All other marks are the properties of their respective owners. All rights reserved.

 

O

PERATOR 

T

EST 

M

ODE

 

If your game is registered to ITNet, you can use your 

Operator ID Card to enter Test Mode. Or, you can 
enter the Operator Test Mode by pressing the Test 
Button inside the coin door, or by flipping SW51-DIP 
Switch 1 to the OFF position.  Be sure the DIP Switch 
is returned to the ON position to return to the game.  
Test Mode allows you to adjust certain game settings 
and track valuable audits and bookkeeping 
information.   

Use the gun or test buttons to navigate through the 
various menus. 

Action   

Gun Control 

Switch Control 

Scroll Down 

Gun Trigger 

Volume Down 

Scroll Up 

Gun Pump 

Volume Up 

Select   

Start Button 

Test 

Note: 
The current code version number and the Board Serial ID are 
displayed at the top of every menu. Call-in information is 
displayed at the bottom of each menu, including the Local time, 
the next scheduled call to ITNet, the last successful ITNet call, 
and the last attempted call to ITNet. 

M

AIN 

M

ENU

 

The first screen displayed in Operator Test Mode is 
the Main Menu.  The Main Menu displays the various 
selections available to the operator.

   

 

ITNET COLLECTIONS & AUDITS RESET 

displays 

the current machine coin counts, for use in separation 
of ITNet fees from your collections.  You can also 

perform collections and audits resets from this menu. 

OPERATOR ADJUSTABLES MENU

 is used for 

customizing the game to your location including player 
costs per game, skill level settings, attract mode 
sounds, etc.  

GAME AUDITS MENU

 allows you to check your 

game’s coin, purchase, region and lifetime coin audits. 

 

ITNET MENU

 is designed to take advantage of many 

of the ITNet capabilities including registering your 
machine with ITNet, disabling/enabling calls to ITNet, 
and forcing a call to ITNet. 

SYSTEM TESTS MENU

 verifies the operation of the 

hardware, controls, and monitor through easy and 
automatic procedures accessed through this menu.  

GUN CALIBRATION MENU

 calibrates the gun for 

aiming and accuracy, to achieve optimal game play.  

MAILBOX

 is currently not functional in Big Buck 

Hunter Call of the Wild. 

HIGH SCOREBOARDS MENU

 gives you quick and 

easy access to the Regular Play (offline) leaderboards 
for each region. 

ITN

ET 

COLLECTIONS & 

AUDITS RESET 

Use this screen to assist in bookkeeping when doing 
collections from your cabinet.  This will show you the 
amount of money owed to ITNet as well as your 
portion currently in the cabinet.   

 

EXIT 

is used when you just want to see the current 

amount of money in the machine but a collection is not 
being made and you do not want to clear the values. 

DISPLAY AUDITS

 will take you to the game audits 

menu. This can be useful when trying to do 
bookkeeping right at the cabinet or for seeing why the 
ITNet portion is a certain amount. 

DO COLLECTION, CLEAR VALUES, RESET 
AUDITS 

is used to erase all of the collection counts 

stored in memory and reset the game audits. Pressing 
the START button here will take you to a verification 
screen asking if you are sure. If you say NO, it will take 
you back to the collections screen leaving all counts 
intact. If you say YES, it will complete the collection 
and take you back to the collections screen. You will 
notice all dollar amounts are now zero and two 
messages stating the collections were cleared and the 
audits reset will show up at the bottom in red. 

Содержание Big Buck Hunter CALL OF THE WILD


















































Отзывы: