42
43
2) Seated Posture
Measurement Posture
•
Sit in a chair with your back straight against the backrest.
• Put a cushion behind your back.
• Make arms naturally descend as if standing.
•
Spread your legs wide enough to keep your thighs from touching each other.
• Do not set your legs up at right angles but spread slightly as the illustration.
Accurate posture
• Test after checking the seated posture correctly.
•
Hold the sitting position for at least 10-15 minutes before measuring.
• Be careful not to touch the steel frame directly if the chair is a steel structure.
Cover or lay insulation such as a blanket over the area touching the steel structure.
• Do not allow bare feet to touch the floor or the steel structure of the chair.
•
Disposable electrode (BWA-ES100) may detach due to the weight of the electrode cable when you are using
forceps electrode. Please be careful.
Caution
• Testez après avoir vérifié la bonne posture assise.
• Gardez la position assise pendant au moins 10 à 15 minutes avant la prise des mesures.
• Si la structure de la chaise est en acier, évitez tout contact direct avec celle-ci. Couvrez ou isolez la région qui touche à la
structure en acier au moyen d'une couverture, par exemple.
• NE PAS permettre aux pieds nus de toucher au sol ou à la structure en acier de la chaise.
• L'électrode jetable (BWA-ES100) tombe facilement à cause du poids du câble de l'électrode lorsque vous utilisez
l'électrode forceps.
Veuillez faire attention.
Attention
BWA_manual_USA_B_210916.indd 43
BWA_manual_USA_B_210916.indd 43
2021-11-24 오전 9:58:35
2021-11-24 오전 9:58:35
