26
27
5) Barcode reader
You can enter the membership number automatically by connecting the barcode reader to the BWA2.0.
*
If the barcode reader is not recognized, please contact InBody Customer Service.
❶
Turn off the BWA2.0.
* When the BWA2.0 is already turned on, it may not be properly connected to the barcode reader.
❷
Connect the USB cable of the barcode reader to the USB HOST port on the right-side port of the BWA2.0.
❸
Turn on the BWA2.0. When the barcode reader is connected, (the barcode reader) icon will
be displayed in the upper left of the test standby screen.
6) Serial distributor (SD400)
You can connect a stadiometer and a blood pressure monitor at the same time if you connect a serial
distributor to the BWA2.0.
❶
Turn off the BWA2.0.
* When the BWA2.0 is already turned on, it may not be properly connected to the stadiometer and the blood pressure monitor.
❷
Connect the serial cable supplied with SD400 to the COM 9-pin serial terminal on the right-side port of
the BWA2.0. Connect the other end of the cable to the serial terminal of the SD400.
❸
Connect each device (stadiometer and blood pressure monitor) via serial cable to each port of SD400
and turn on each device.
❹
Turn on the BWA2.0. Set the SD400 at "26. Serial Connect" on Setup in Administrator Menu, and set
the device connected to each port of the SD400.When each device is connected, the device icon
will be displayed in the upper left of the test standby screen.
COM 9-pin serial terminal
USB HOST
Printer port
BWA_manual_USA_B_210916.indd 27
BWA_manual_USA_B_210916.indd 27
2021-11-24 오전 9:58:33
2021-11-24 오전 9:58:33
