30
31
3. Connecting to the Internet
Once the BWA2.0 is connected to the Internet, you can use it to connect with cloud services or LookinBody.
*
If the cloud service does not work or if LookinBody is not recognized, please contact InBody Customer Support.
1) Connecting LAN
❶
Press the [Administrator Menu] button on the test standby screen.
❷
Enter the password to enter the Administrator Menu.
❸
Enter "16. Connect to the Internet".
❹
Press LAN and then press the Next button.
*
You may need to enter the IP address or DNS address manually depending on the service area. In this case, press
the corresponding button to enter manually.
❺
Connect the LAN cable to
the shape port on the right-side port of the BWA2.0.
*
LAN cable should be used by connecting to a cable connected to a terminal registered with Internet service or
to a connector registered with an Internet service.
❻
You can connect to LookinBody or use the cloud service through LAN after completing an internet connection.
BWA_manual_USA_B_210916.indd 31
BWA_manual_USA_B_210916.indd 31
2021-11-24 오전 9:58:33
2021-11-24 오전 9:58:33
