10
11
• Do not operate or touch the device while it is calibrating. It may cause errors to future tests.
• Ne manipulez pas l’appareil BPBIO750 et ne le faites pas fonctionner pendant qu’il effectue un test
automatique (env. 10 s); des erreurs et des résultats inexacts pourraient en résulter.
Caution
Attention
Place your elbow on the elbow point.
Press the START button.
Do not move during the measurement.
Irregular signal was detected.
SYS.
P.R
DIA.
Place your elbow on the elbow point.
Press the START button.
Do not move during the measurement.
SYS.
P.R
DIA.
4. Use the anti-theft groove to prevent theft.
* Theft protection cable is sold separately.
5. Turn the BPBIO750 on by pressing the power switch located on the back of the device.
6. When powered on, the BPBIO750 will automatically calibrate and display the following screen.
Power switch
7. Adjust the volume by turning the volume knob on the rear of the BPBIO750.
BPBIO750_manual_다국어 합본_F_210517.indd 10
BPBIO750_manual_다국어 합본_F_210517.indd 10
2021-05-21 오전 10:41:16
2021-05-21 오전 10:41:16
