Inax DV-S618, Руководство пользователя

Страница: 48 / 62

47
Cleaning and Maintenance
Flashing Battery Level Indicator on the Remote Control
The battery LED on the home screen ashes when the batteries are low. ( ☞ Page 29)
[CAUTION]
Install batteries in the correct orientation of polarity
as illustrated on the remote control display.
Do not use a mix of new and old batteries.
Use alkaline batteries only.
Be careful not to touch any switches on the remote
control when replacing batteries.
Lift the remote control out of the holder.
Holder
Remote
Control
Remove the back cover and replace with
two new 1.5-V AA alkaline batteries.
* If the back cover is dif cult to remove, use a at-
blade screwdriver or similar tool to release the lock.
Back cover
Lock
Alkaline
batteries
Reinstall the back cover and then use the
【 Hr. 】 and 【 Min. 】 buttons to adjust the time
( ☞ Page 12).
Return the remote control into the holder.
Replacing Remote Control Batteries
(Reference)
The battery LED will ash when the batteries are low. This LED normally does not appear.
The batteries supplied with the toilet are used for operation checks at the factory, and so have a shorter service
life than typically available batteries.
Batteries may become fully discharged before the battery LED ashes depending on the size of the room and
material/color of the walls, particularly with darker colors.
When replacing batteries, wait for the battery LED to disappear after the batteries have been removed before
inserting the new batteries. This is because the battery LED may remain ashing after batteries have been replaced.
Battery LED