Inalto II65T, Руководство пользователя, Страница: 9 / 12

USER MANUAL PAGE 16 PAGE 17
By ensuring proper cleaning and maintenance of your Inalto cooktop, you can ensure that it will have a long and fault free
operation.
WARNING! Do not start cleaning the cooktop until it has completely cooled.
CLEANING YOUR CERAMIC COOKTOP
► Any residues that are left on the cooktop surface from cleaning agents will damage it. You should remove any residues
with warm water mixed with a little washing up liquid.
► Abrasive cleaners or sharp objects will damage the cooktop surface; you should clean it using warm water mixed with
a little washing up liquid.
► Although it is easier to clean some deposits whilst the cooktop surface is still warm, you should take care not to burn
yourself if cleaning the cooktop surface when it is still warm.
After each use:
► Wipe the cooktop over with a damp cloth.
► Dry the cooktop by rubbing the surface with a clean cloth.
Type of deposit Remove immediately? Remove when the cooktop
has cooled down?
What should I use to
remove the deposit?
Sugar or food/liquid contain-
ing sugar
Yes No Ceramic cooktop scraper
Tin foil or plastic Yes No Ceramic cooktop scraper
Fat splashes No Yes Ceramic cooktop cleaner
Metallic discolouration No Yes Ceramic cooktop cleaner
Water splashes or water rings No Yes Ceramic cooktop cleaner
USING A SPECIALIST INDUCTION COOKTOP CLEANER
It is possible to purchase a specialist induction cooktop cleaner/conditioner.
You should follow the instructions given by the manufacturer of the cleaner and ensure that it is suitable for use on your
appliance.
CLEANING & MAINTENANCE
TROUBLESHOOTING
OPERATION IN CASE OF EMERGENCY
IMPORTANT! If your appliance appears to be operating incorrectly, then you should disconnect it from your mains
gas and electrical supply and then contact the Residentia Group Support team on 1300 11 HELP
(4357).
In the event of an emergency you should:
► Switch off all cooktop controls.
► Switch the gas off at the isolation switch or at the gas meter.
► Call the Residentia Support Team on 1300 11 HELP (4357).
TROUBLESHOOTING
Some minor faults can be fixed by referring to the instructions given below. There is also a self-help section online at
http://www.residentiagroup.com.au.
► The cooking zones are not functioning or will not switch on.
▷ Check that the mains electrical supply to the appliance is correct and working. Check the mains fuse.
▷ It has been longer than 2 minutes since a zone was switched on and the cooktop has automatically switched off.
▷ The safety lock has been switched on. Refer to the “Child Lock” section within this user manual for information on
how to turn off the safety lock.
▷ Several cooking zone selection buttons have been pressed at once. Only touch one cooking zone button at a time.
▷ The pots or pans you are using are not suitable for use on an induction cooktop. Refer to the “Suitable pots or pans”
section within this manual.
► The residual heat indicator has not come on after I have switched a cooking zone off.
▷ The cooking zone has only been turned on for less than 30 seconds.
IMPORTANT! If the cooking zone does appear to be hotter than 50°C or has been activated for longer than 30
seconds, and the residual heat indicator has not come on, you should call the Customer Care
Department.
► A humming sound is heard when a cooking zone is selected.
▷ This is normal; the sound will disappear when the zone heats up.
► The cooking zones have become discoloured.
▷ This maybe caused by burnt on remnants of food. This will not affect the working of the appliance. However you
should make sure that the cleaning instructions are being followed regularly.
Note: That if an engineer is asked to attend whilst the product is under warranty and finds that the
problem is not the result of an appliance fault, then you may be liable for the cost of the call out
charge.
The appliance must be accessible for the engineer to perform any necessary repair. If your appliance is installed in such
a way that an engineer is concerned that damage will be caused to the appliance or your kitchen, then they will not
complete a repair. This includes situations where appliances have been tiled in or sealed in with sealant.
Please refer to the conditions of that appear on the warranty card at the rear of this user manual.