Inalto II65T, Руководство пользователя

Страница: 6 / 12

USER MANUAL PAGE 10 PAGE 11
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS
The power supply cable is not accessible through cupboard doors or drawers
There is adequate flow of fresh air from outside the cabinetry to the base of the hob
If the hob is installed above a drawer or cupboard space, a thermal protection barrier is installed below
the base of the hob
The isolating switch is easily accessible by the customer
1. The induction hotplate must be installed by qualified personnel or technicians.
We have professionals at your service. Please never conduct the operation by yourself.
2. The hob will not be installed directly above a dishwasher, fridge, freezer, washing machine or clothes
dryer, as the humidity may damage the hob electronics
When you have installed the cooktop, make sure that
►
►
►
►
Before locating the fi ing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the
controls protruding from the hob.
Ad j usting the bracket position
Fix the hob on the work surface by screw 2 brackets on the bottom of hob(see picture) after installation.
Adjust the bracket position to suit for different table top thickness.
Cautions
3. The induct ion hotplate shall be installed such that better heat radiation can be ensured to enhance its
reliability.
4. The wall and induced heating zone above the table surface shall withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
This hob must be connected to the mains power supply only by a suitably qualified person.
Before connecting the hob to the mains power supply, check that:
1. the domestic wiring system is suitable for the power drawn by the hob.
2. the voltage corresponds to the value given in the rating plate
3. the power su pply cable sections can withstand the load specified on the rating plate. To connect the hob to the
mains power supply, do not use adapters, reducers, or branching devices, as they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so that its temperature will not
exceed 75˚C at any point.
Check with an electrician whether the domestic wiring system is suitable without alterations. Any alterations must
only be made by a qualified electrician.
► If the cable is damaged or to be replaced, the operation must be carried out the by after-sale agent with dedicated
tools to avoid any accidents.
► If the appliance is being connected directly to the mains an omnipolar circuit-breaker must be installed with a
minimum opening of 3mm between contacts.
► The installer must ensure that the correct electrical connection has been made and that it is compliant with
safety regulations.
► The cable must not be bent or compressed.
► The cable must be checked regularly and replaced by authorised technicians only.
Connecting the hob to the mins power supply
►
►