inada HCP-WG1000A, Руководство по эксплуатации

Страница: 7 / 80

8
C
OMPONENT
S & DESCRIPTION
5
4
3
2
1
Remote Control
①
POWER Button
Turns the remote control power ON and
OFF. Pushing the POWER button while the
chair is activated causes the rollers to return
to the storage position, after which the
chair turns itself off .
The button lights in green while the power
to the remote control is ON, lights in orange
while the power is OFF, and fl ashes in red
while the chair is stopped in an emergency.
②
EMERGENCY STOP
Button
Use this button to shut the chair off
immediately in an emergency or if there
is a malfunction during operation of the
chair. The rollers will stop immediately.
③
Roller Position Display
The position of the roller during the
massage is displayed.
④
Shiatsu Points Locator
Indicator A light indicates when the shiatsu point search
is operating and when the search has fi nished.
⑤
Preset Program Buttons 1 Use to select the corresponding program.
⑥
Recline Button
Use to adjust the angle of the reclining
seat back.
⑦
Position Adjustment
Buttons
(Shoulders & Legs)
Use to adjust the shoulder position while
the shiatsu point locator is operating,
and to adjust the roller position during
manual selection mode.
⑧
Preset Program Buttons 2 Use to select the corresponding program.
⑨
Intensity Adjustment
Buttons
Use to adjust the intensity of the back
mechanism and leg mechanism.
⑩
Balance Adjustment Buttons
Use to set the balance between the left
and right massage of the back mechanism.
⑪
Manual Selection Buttons
Use to select basic operations or special
operations.
⑫
Arm Air Massage Button Use to select an air massage of the arms.
⑬
Auto Upright Cancel
Button
The automatic seat reclining raise
operation when the course is completed
can be set ON/OFF.
⑭
Hand Warmer Button Use to switch the hand warmer ON/OFF.
Warning
● Do not spill water and/or other liquids on the remote control.
● Do not handle the remote control with wet hands.
Caution
● Do not sit on the remote control. Do not drop or step on the remote control. Do not pull the remote control cord forcibly.
● Do not use pointed or hard objects to push the buttons.
→ May result in damage to the remote control.
Remote Control/Inside the Panel
①
②
④
⑦
⑥
⑬
⑨
⑩
⑫
Panel
③
⑤
⑭
⑧
⑪