18
❺
Session completed.
Automatic Raise Cancel
The reclining seat back automatically rises, and the rollers
return to their storage position (upper part of the seat back).
Then the power to the remote control is shut off . However, the
reclining of the seat back and the up or down adjustment of
the leg rest can still be operated.
The function in which the seat back
automatically rises when the session
is completed can be canceled. A
green lamp lights while it is canceled.
Press the button again to release the
cancelation, and the seat back rises
when the session is completed.
Air Massage Intensity Adjustment and Cancelation
The air massage intensity can be adjusted.
Each time the air intensity button is pressed, the intensity changes in the order of
Low, Medium
and
High
.
(The default setting when the session starts is Medium.)
Max
Mode
In the same way, the intensity can be changed in the order of
Low, Medium
and
High
even when Max Intensity
mode is ON.
(The default setting when Max Intensity mode starts is High.)
The arm air massage can be turned ON/OFF.
Set the arm air massage operation during the session.
Each time the button is pressed, the setting switches between
ON/OFF
.
The lower back/seat air massage can be turned ON/OFF.
Set the seat air massage operation during the session.
Each time the button is pressed, the setting switches between
ON/OFF
.
The leg air massage can be turned ON/OFF.
Set the leg air massage operation during the session.
Each time the button is pressed, the setting switches between
ON/OFF
.
Changing Sessions
Before the session in progress fi nishes, you can change it to another session. After a total duration of 30 minutes, the
session in progress stops even if not completed.
Switching from One Preset Session in Progress to Another
When one preset session button is pressed while another preset session is in progress, the rollers return to the
detected shoulder positions, and the shoulder positions are rechecked before starting the massage again. The
shoulder positions can be adjusted while the shoulder positions are being rechecked.
Switching from a Preset Session to Manual Session Mode
When one of the buttons for manual session mode located inside the panel of the remote control is pressed while a
preset session is in progress, the preset session immediately stops, and the selected operation starts. If an operation
that detects the shoulder positions is selected, the shoulder positions are rechecked before starting the operation.
(To select an air massage, fi rst select an operation such as kneading or tapping, or press the button to stop the
preset session in progress before making the session.)
Stopping in the Middle of a Massage
To stop mid-massage, press the button. The rollers return to their storage positions and stop.
In an emergency
or
if there is some malfunction
during the operation of the chair, press the
EMERGENCY STOP button. The rollers will stop immediately. After confi rming safety, press the button. The rollers
return to their storage positions and stop.
Caution
●
If you feel the massage is too strong, reduce the stimulation according to this Operating Manual. If this solution does
not work, stop operation immediately and contact the “Repair Service Center“ (see back page) for assistance.
→
May result in injury if you continue use with high stimulation under such circumstances.
●
Do not place your hands or feet into the roller tracks, into the space between the seat back and the seat or into the moving parts.
Do not sit wearing hard objects, such as hair accessories, necklace, watch, bracelet, or ring.
●
If your leg or foot comes out of the leg rest during the massage, do not try to force it back in.
●
Keep massage sessions to no more than 15 minutes in length. Do not exceed 5 minutes for an area-specifi c massage of
any particular part of the body.
→
Continuous use for extended periods of time can result in over-stimulation, which could cause the opposite of the desired eff ect, or even injury.
The total amount of time for a daily massage should be limited to about 30 minutes.
When a preset session is selected, the reclining seat back may recline automatically. In addition, during some
sessions the reclining seat back moves automatically, so before using the chair, make sure that there is no person or
obstruction behind it. Also, do not let other people approach the chair during use.
[PRESET SESSIONS]
Содержание Flex 3s HCP-S373A
Страница 31: ......
