inada Flex 3s HCP-S373A, Руководство по эксплуатации

Страница: 13 / 32

12
POSITION ADJUSTMENT
How to Sit
When the chair is off , the rollers are normally drawn back into the left and right sides of the upper part of
the seat back (Storage Position). For safety, fi rst check the position of the rollers. If they are in any position
other than the storage positions, turn the main POWER switch ON before sitting down to allow the rollers
to return to their storage position. When you fi nish checking, sit down slowly in the center of the seat.
Caution
● Do not sit down on the chair with the leg rest raised.
→ Any sudden impact on the leg rest could cause damage to the mechanism. Also, an accident or injury may result if the chair tips over.
● Before using, raise the reclining seat to its fully upright position. Then recline the seat back slowly to the most
comfortable position, remembering to start off with a lighter massage.
Headrest (Small) Adjustment
Use the headrest (small) by matching it to the position of your head.
Proper Position of Small Headrest
The hollow in the
headrest (small)
does not make
contact with the
back of the head.
[POSITION ADJUSTMENT
]
The headrest cover attached to the headrest (small) can be removed by following the procedure below.
* Be careful at this time, because the headrest cover may tear if you turn it over with excess force.
*To install, repeat the procedure in the reverse order.
Removing the Headrest Cover
① Bend the headrest. ② Remove the headrest from the side.
The back of the
head is placed
in the hollow
in the headrest
(small).
Hollow