35
Level
trOll
Operator’s Manual
0052210 rev. 006
Customizing the home sCreen disPlay
Changing units
1. Click the Senors tab
, select the level/pressure sensor.
2. Click the Configure button
in the
control panel.
3. In the Sensor Setup screen, select a
parameter, then select a unit. Repeat for
each parameter as necessary.
4. Click OK
to change the units and
return to the Sensors tab.
Changing the rate at Which the readings update
Also called the “poll rate,” this can range from 1 to 30 seconds.
1. Select Preferences menu > Home View Settings.
2. Adjust the Poll Rate. Default: 5 seconds.
Changing the decimal Places displayed
To change the number of decimal places displayed for each reading:
1. Select Preferences menu > General Settings.
2. Under Parameter Defaults, select a parameter, then the significant
decimal digits for each parameter.
real-time graphing
To view a real-time trend graph: click the graph button
To view a graph with a data table below it, select Preferences menu >
Graph Settings. Check
R
the Data Panel option. Click OK.
seCtion 4: usinG Win-situ
