IMS MDrive34Plus Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 98

background image

The information in this book has been carefully checked and is believed to be accurate; however, no responsibility is assumed for inaccuracies.

Intelligent Motion Systems, Inc., reserves the right to make changes without further notice to any products herein to improve reliability, function or design. Intelligent Motion

Systems, Inc., does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights of

others. Intelligent Motion Systems and

are trademarks of Intelligent Motion Systems, Inc.

Intelligent Motion Systems, Inc.’s general policy does not recommend the use of its products in life support or aircraft applications wherein a failure or malfunction of the product may

directly threaten life or injury. Per Intelligent Motion Systems, Inc.’s terms and conditions of sales, the user of Intelligent Motion Systems, Inc., products in life support or aircraft

applications assumes all risks of such use and indemnifies Intelligent Motion Systems, Inc., against all damages.

TM

MDrive34Plus Microstepping

Revision R071108

Copyright

© Intelligent Motion Systems, Inc.

All Rights Reserved

MDrive34Plus Microstepping Hardware Reference Change Log

Date

Revision

Changes

06/26/2006

R062606

Initial Release

03/12/2007

R031207

Changed Max Step Clock rate to 5 MHz, Min Pulse width to 100 ns, default input filter to 2.5 MHz (50 ns). Changed
temperature spec to -0 to +75°C (non-condensing humidity, measured at the heat sink) and -0 to +90°C (non-condensing
humidity, measured at the motor.) Added Section 2.1: Mounting and Interface Guidelines and Section 2.2: Interfacing
DC Power. Added new cables to Appendix D.

Major updates throughout.

12/14/2007

R121407

Minor corrections and modifications. Relevant to Frimware Version 3.0.02

03/17/2008

R031708

Added CW/CCW to the list of clock option labels for the differential input version. Functionality is the same as the
up/down clock type. Added qualification os personnel and intended use statements to inside front.

07/11/2008

R030708

Updated to give visibility to isolated USB to SPI Communications Converter cables and new Mating Connector Kits.

«
1
2
3
4
...
»

Содержание MDrive34Plus



































































































Отзывы:

Нет отзывов

Похожие инструкции для MDrive34Plus

ERS VAR10 SZ 2500

Бренд: Warner Страницы: 16

Бренд: Hitachi Страницы: 41

Бренд: Hitachi Страницы: 1037

Бренд: Hitachi Страницы: 1104

Бренд: SUHNER Страницы: 16

Бренд: Lister Petter Страницы: 81

Бренд: Lister Petter Страницы: 100

Бренд: Toro Страницы: 37

Бренд: Habasit Страницы: 28

Бренд: CAME Страницы: 44

Бренд: Valach Motors Страницы: 3

Бренд: Honda Страницы: 69

Бренд: Honda Страницы: 97

max-18tz series

Бренд: O.S. engine Страницы: 25

Бренд: Rockwell Automation Страницы: 28

Бренд: Toyota Страницы: 1021

BREVINI K 00 Series

Бренд: DANA Страницы: 70

Бренд: EMAK Страницы: 152

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды