Impulse HSR007, Руководство пользователя, Страница: 52 / 59

Page 12 of 31
5.5 INTERVALS SCREEN
The INTERVALS screens are shown below:
There shall be two interval types that can be selected and they are as follows:
 Time Intervals
 Distance Intervals
The first screen that will be shown is the one for
TIME INTERVAL GOAL
. To select between the available Interval
types, the user shall press either the DOWN or UP button to navigate to the next or previous choice respectively.
If the user presses the ENTER button they are selecting the displayed Interval workout type and the system shall
transition to the applicable setup screen.
To exit the INTERVALS screen and return to the WORKOUTS screen the user shall press the STOP button.
Page 22 of 31
7 CONFIGURATION MODES
7 .1 SETTINGS SCREENS
To enter CONFIGURATION MODE the user shall press START , UP , and STOP simultaneously.
The graphic below shows the
SETTINGS
screens:
There shall be five options provided to the user on these screens and they are as follows:
 LEVEL CAL – This selection gives the user the ability to calibrate the potentiometer setting relative to the
position of the magnets for the Consumer Models and would be used to adjust the motors position on the
Commercial Models
 HR TEST – This selection gives the user the ability to test the HR system
 VOLUME – This selection gives the user the ability to adjust the volume of the beeper

FW UPDATE –
This selection gives the user the ability to perform firmware updates for the console
firmware
 STATS – This selection gives the user the ability review the total accumulated time, total accumulated
distance, and firmware version
The first screen that will be shown is the one for LEVEL CAL . To select between the available Settings, the user
shall press either the DOWN or UP button to navigate to the next or previous choice respectively.
If the user presses the ENTER button they are selecting the displayed Setting and the system shall transition to the
applicable Setting screen.
To exit the SETTINGS screens and return to the IDLE screen the user shall press the STOP button.
─
52
─
Console Panel Functions