Impulse HSR007, Руководство пользователя, Страница: 30 / 59

─ ─ 30
Maintenance & Service
All Ski-Rows are engineered for years of operation. Regular maintenance and cleaning will
lengthen the life and preserve the appearance of the Ski-Row.
Let noise be your first indication that a repair or adjustment is required. Please discontinue
use immediately and contact an Authorized Service Technician Dealer if an unusual noise,
scraping, knocking, grinding or vibration is detected. Often, a minor issue will become a
major repair if ignored and use is continued.
The Ski-Row is manufactured of durable materials; the plastics are molded of strong and
chemical-resistant ABS; the frame is produced of high-tensile steel and protected with an
industrial-grade, powder paint coating process for the highest level of corrosion resistance;
the hardware used for the assembly is corrosion resistant. However, it is important to note
that perspiration can be extremely corrosive if allowed to accumulate on the machine.
PERSPIRATION IS VERY CORROSIVE AND IF ALLOWED TOREMAIN ON THE
ATTENTION:
MACHINE, WILL CAUSE DISCOLORATION, FADING, RUST AND ODORS. UNFORTUNATELY,
THESE CONDITIONS ARE NOT COVERED UNDER THE WARRANTY POLICY.
After each workout, wipe down the entire unit, including the console with a mild soap
solution followed by a thorough drying with a clean towel. Positioning a small spray bottle
and towel near the unit will help ensure that your equipment looks new for many years.
Do not use abrasive or coarse brushes or cloths as damage to the surfaces may occur.
Do not flood any area with cleaning solution or liquid. Do not use aggressive chemicals or
solvents to clean the Ski-Row.
A guideline for service is provided below. If the environment for the Ski-Row is extraordinarily
dirty or the usage is extremely heavy, the monthly inspection/service should be performed
more often.
Maintenance Recommendations
TASKK DAILY MONTHLY
Wipe down all surfaces with a mild soap solution and dry thoroughly. X
Inspect unit for noisy, damaged or loose components. X
Ensure the unit does not rock. If necessary, re-adjust the leveling
feet.
X
Inspect the entire unit for loose hardware, including the beam,
support legs, frame and plastic covers.
X
Inspect the row and ski ropes for wear. X
Clean all dust, lint or debris from all fan openings. X
Move the Ski-Row and clean/vacuum dust, lint or debris found under
the frame.
X