Cheetah Python Cameras User Manual | CoaXPress (CXP) Interface
August 27, 2019
Page
36
of
86
Rev 1.0
Table 14:
Acquisition Control parameters (continued)
Parameter Name
Type
Value
Access Description
PixelClock
Integer
Min: 48
Max: PixelClockMaxReg
RW
Sets pixel clock in
MHz.
PixelClockMax
Integer
Min: 32
Max: 511
RO
Sets the imager's
line time in units
of clocks.
CurrentExposureTime
Integer
RO
Returns current
exposure time in
microseconds.
CurrentFrameTime
Integer
RO
Returns current
frame time in
microseconds.
MinMaxExposureTime
Integer
40
µ
s min up to 1 frame time in 1
µ
s
increments
RO
Gets the exposure
min and max time
in microseconds.
TriggerMode
Enumeration
String
Num.
"Off"
0
"On"
1
RW
Enables the trigger
mode of
operation.
A trigger initiates
an exposure then
readout sequence
– exposure and
readout can
overlap
TriggerSoftware
Command
WO
Instructs the
camera to
generate one short
trigger pulse to
capture and read
out one frame.
TriggerSource
must be set to
Software.
TriggerSource
Enumeration
String
Num.
"Line1"
0
"Line2"
1
"CxpTrigger"
2
"PulseGenerator"
4
"Software"
5
RW
Specifies internal
signal or physical
input line to use as
the trigger source.
Selected trigger
must have
TriggerMode set to
On.
TriggerActivation
Enumeration
String
Num.
"RisingEdge"
0
"FallingEdge"
1
RW
Specifies activation
edge of trigger.