Cheetah Python Cameras User Manual | CoaXPress (CXP) Interface
August 27, 2019
Page
16
of
86
Rev 1.0
Hardware
Camera Back Panel
The Cheetah Python CXP cameras provide three connectors for outside equipment and one
status indicator LED on the back panel. The panel includes:
1.
Two 75-ohm, 1.0/2.3 DIN mini-coax receptacles (Amphenol P/N 282121-75)
provide 2-channel data output, control data (including Canon lens control), trigger,
and power over CXP.
2.
Male 12-pin Hirose type miniature locking receptacle #HR10A-10R-12PB(71)
provides the general purpose I/O interface.
3.
USB type B programming/SPI connector.
4.
Status LED indicates the status of the camera.
5.
Serial Number shows camera model and serial number.
Figure 1:
Cheetah Python CXP Camera back panel
2-channel CXP-6 using 1.0/2.3
DIN mini-coax connectors for
data output, control, and
power
Connector for factory use
12- pin Hirose type connector
for I/O interface
Status LED
Channel 0
(Master)
Channel 1
(Slave)
4-channel CXP-6 using 1.0/2.3
DIN mini-coax connectors for
data output, control, and
power
Connector for factory use
12- pin Hirose type connector
for I/O interface
Status LED
C5180, C4181, C4180:
C5190, C4191, C4190:
Channel 0 (Master)
Channel 1 - Channel 3
(Slave)