Cheetah Pregius Camera with GigE Vision
®
Interface – User Manual
August 27, 2019
Page
49
of
123
Rev 1.0
Table 18:
Parameters availability
Parameter
Camera model supporting the parameter
All models except for POE-C2000 and POE-C2400
Line 2 in
POE-C2010, POE-C2410, POE-C2410Y/Z, POE-C3210, POE-C4010, POE-C4110, POE-C4110Y/Z,
POE-C4410, POE-C5410, POE-C6410
All camera models except for POE-C2000 and POE-C2400
All camera models except for POE-C2000 and POE-C2400
IN2 in
POE-C2010, POE-C2410, POE-C2410Y/Z, POE-C3210, POE-C4010, POE-C4110, POE-C4110Y/Z,
POE-C4410, POE-C5410, POE-C6410
OUT2
in
All camera models except for POE-C2000 and POE-C2400
All camera models except for POE-C2000, POE-C2010, and P67-C2010
POE-C4410, POE-C5410, and POE-C6410
In the following tables, parameter names underlined in
red italic
letters are changeable only
if image acquisition is turned
off
. You cannot change these parameters if image acquisition is
on.
Device Control
Device Control provides read-only information about the camera’s XML file and enables
camera reset functionality.
Table 19:
Device Control parameters
Parameter Name
Type
Value
Access Description
DeviceSFNCVersionMajor
Integer
RO
Major version of SFNC
used for XML.
DeviceSFNCVersionMinor
Integer
RO
Minor version of SFNC
used for XML
DeviceSFNCVersionSubMinor
Integer
RO
Sub-minor version of SFNC
used for XML
DeviceReset
Command
WO
Resets camera to power-
up state (resets both the
GEV Engine and the
camera head)
CameraHeadReset
Command
WO
Resets the camera
circuitry. The GEV Engine
doesn't reset. NOTE: After
camera reset, issue a
UserSetLoad command