Imperx Cheetah Pregius POE-C2000, Руководство пользователя

Страница: 54 / 123

Cheetah Pregius Camera with GigE Vision
®
Interface – User Manual
August 27, 2019 Page
54 of 123
Rev 1.0
Acquisition Control
Acquisition Control lets you configure settings for image capture, exposure, frame rates,
triggers, and so on. It also provides read-only information on frame and exposure time.
Table 23:
Acquisition Control parameters
Parameter Name Type Value Access Description
AcquisitionMode Enumeration String
"SingleFrame"
"MultiFrame"
"Continuous"
Num
.
0
1
2
RW Defines the number of
frames to capture during
acquisition and the way
the acquisition stops
(refer to 5.4 Acquisition
Control section for more
information)
AcquisitionStart Command WO Starts device acquisition
AcquisitionStop Command WO Stops acquisition after
current frame completes
readout.
AcquisitionAbort Command WO Stops acquisition
immediately, but a
partially transferred
image will be completed
AcquisitionFrameCount Integer Min: 1
Max: 65535
RW Number of Frames to
acquire in Multi-Frame
Acquisition mode
ExposureMode Enumeration String
"Off"
"TriggerWidth"
"Timed"
Num.
0
1
2
RW Sets exposure mode.
“Off”: exposure time
equals frame time (refer
to 5.1 Exposure Control
for more information)
ExposureTime Float RW Sets Timed Exposure in
micro-seconds when
ExposureMode is Timed
and ExposureAuto is
“Off”.
AcquisitionFrameRateEnable Boolean RW Controls if the
AcquisitionFrameRate
and
AcquisitionFrameTime
features are writable and
used to control the
acquisition rate. If “On”,
you can extend the
actual frame time
beyond the free-running
frame time.
AcquisitionFrameTime Integer RW Sets Frame Time in
microseconds. 16
seconds maximum.