Cheetah Pregius Camera with GigE Vision
®
Interface – User Manual
August 27, 2019
Page
25
of
123
Rev 1.0
Pin Assignments
The RJ-45 connector’s pin assignment conforms to the Ethernet standard IEEE 802.3
1000BASE-T.
The Hirose connector on the camera’s back panel is a male type miniature locking receptacle
#HR10A-10R-12PB(71). The Imperx PS12V04A power supply (sold separately – see
and External Power Supply) terminates in a female Hirose type miniature locking plug
#HR10A-10P-12S(73) and has two small BNC pig-tail cables for the external trigger input
(black) and strobe output (white).
Figure 4:
12-pin Hirose Connector Pin-outs
(POE-C2010, POE-C2410, POE-C3210, POE-C4010, POE-C4110, POE-C4410, POE-C5410, and
POE-C6410 cameras)
Table 11:
12-pin Hirose Connector Pin Mapping
Pin
Signal Name
Use
1
+12 VDC Return
12 VDC Main Power Return
2
+12 VDC
12 VDC Main Power
3
Reserved
Reserved
4
Reserved
Reserved
5
OUT2 RTN
General Purpose Output 2, Contact 1 (Opto-isolated)
6
OUT1 RTN
General Purpose Output 1 Return (TTL)
7
OUT1
General Purpose Output 1 (TTL)
8
IN1
General Purpose Input 1 (Opto-isolated)
9
IN2
General Purpose Input 2 (TTL/LVTTL)
10
IN1 RTN
General Purpose Input 1 Return (Opto-isolated)
11
IN2 RTN
General Purpose Input 2 Return (TTL/LVTTL)
12
OUT2
General Purpose Output 2, Contact 2 (Opto-isolated)