Cheetah Pregius Camera with GigE Vision
®
Interface – User Manual
August 27, 2019
Page
31
of
123
Rev 1.0
PS12V04A Standard Power Supply
Figure 9:
PS12V04A power supply (ordered separately)
PS12V04A Power Supply Specs:
Cable length:
Supplied AC power input cable (IEC): 1.8 m (6’) 100 - 240 V AC, 50 – 60 Hz 1 A.
Power supply Output (+12 V): 1.5 m (5’) ± 15 cm (6”) connector HIROSE #HR10A-10P-12S.
Strobe & Trigger: 15 cm (6”) ± 1 cm (0.5”) connector BNC male.
Auto Iris Option: 15 cm (6”) ± 1 cm (0.5”) Video type 4 Pin MINI plug connector E4-191J.
Electrical:
Over-Voltage Protective Installation.
Short-circuit Protective Installation.
Protection Type: Auto-Recovery.
12 V to 13 V DC, 12.6 V DC nominal, 2 A.
Load regulation ± 5%.
Ripple & Noise 1% Max.
Regulatory:
Class 1
Safety standards UL60950-1, EN60950-1, IEC60950-1.
Safety (1) EMC UL/CUL, CE, TUV, DoIR+C-Tick, Semko, CCC, FCC.
Safety (2) BSMI, FCC.
It is strongly recommended that you use the PS12V04A power adapter from Imperx for
powering POE-C2010, POE-C2410, POE-C3210, POE-C4010, POE-C4110, POE-C4410,
POE-C5410, and POE-C6410 cameras.
CAUTION !