Cheetah Pregius Camera with GigE Vision
®
Interface – User Manual
August 27, 2019
Page
59
of
123
Rev 1.0
Table 26:
Status parameters (continued)
Parameter Name
Type
Value
Access Description
CurrentAvgOrPeakLumina
nce
Integer
RO
Returns current
average or peak
luminance in counts.
AgcAecStatus
Integer
RO
Displays the value of
AgcAecStatus register
Data Correction
Data Correction parameters enable you to implement look-up tables and other techniques
to improve image sensor performance.
Table 27:
Data Correction parameters
Parameter Name
Type
Value
Access Description
LUTEnable
Enumeration
String
"Off"
"LUT1"
"LUT2"
"LUT3"
"LUT4"
Num.
0
1
2
3
4
RW
Selects and enables LUT to
be used in processing
image.
FFCEnable
Enumeration
String
"Off"
"FFC1"
"FFC2"
Num.
0
1
2
RW
Selects FFC to be used in
processing image, if
supported. Some cameras
may not support FFC.
BadPixelCorrection
Enumeration
String
"Off"
"Factory"
"Dynamic”
"FactoryAndDynamic"
"User"
"UserAndDynamic"
Num.
0
1
2
3
4
5
RW
Enables bad pixel
correction. You can upload
your own bad pixel map.
Dynamic Bad pixel
correction supplements
options 3 and 5.
BadPixelThreshold
Integer
Min: 0
Max: 4095
RW
Sets threshold for dynamic
bad pixel correction
algorithm.
NegativeImage
Boolean
RW
Inverts the image from
positive to negative.
ReverseX
Boolean
RW
Flip horizontally the image
sent by the camera. The AOI
is applied after the flipping.
ReverseY
Boolean
RW
Flip vertically the image
sent by the camera. The AOI
is applied after the flipping.