imperialsystemsinc.com
8
Imperial
Systems
Inc.
2.2.1 Prepare For Emergencies
Be prepared in case of emergencies.
Keep a fire extinguisher and first aid kit close to the machine.
Keep emergency phone numbers close to your phone.
Know your address so emergency services can locate
you if an emergency arises.
2.2.2 Replace Safety Signs
Replace missing or damaged safety signs.
Safety sign locations are identified in Section 3 of this manual.
Replacement safety signs are available from Imperial Systems, Inc.
2.3 Maintenance Hazards
Before servicing, disconnect and lockout power
source. Read and understand this manual. If you do
not understand any part of the manual, contact Imperial
Systems, Inc. at 724-662-2801.
Always wear face and/or eye protection, safety shoes,
and other protective equipment appropriate for the job.
Do not make unauthorized modifications. Contact
Imperial Systems, Inc. at 724-662-2801 before you
weld, cut/drill holes, or make any other modifications.
Always use Imperial Systems, Inc. replacement parts.
2.4 Hazards From Modifying Equipment
Do not make any alterations to your equipment. Altering
may cause your equipment to be unsafe and may void
the manufacturers’ warranty.
2.5 Pressurized Air Hazards
Compressed air can cause serious injury or death.
2.6 Safety Warning Labels
WARNING
Disconnect and lockout power source
before performing inspections, service or
maintenance.
WARNING
Keep clear of moving components.
Moving parts can crush and cut.
Follow lockout procedure before servicing.
WARNING
Entanglement hazard.
Keep clear of moving components.
Wear proper protective equipment
appropriate for the job.
WARNING
Do not use compressed air for any other
purpose than that for which it is provided.
Never direct a stream of compressed air
towards your body or the body of another person.
Before using, check all components for
damage or wear. Make sure connections
are tight and hoses are in good condition.
WARNING
To protect you and others against death or
serious injury, all labels shown must be on
machine and must be legible.
If any of these labels are missing or cannot
be read, contact Imperial Systems, Inc. for
replacement labels.
Содержание CMAXX
