Imperial Systems CMAXX, Инструкция по установке, эксплуатации и обслуживанию

Страница: 7 / 28

2. Safety
2.1 Safety Alert Symbol And Signal Words
You must read, understand and follow the instructions
given by the operating unit manufacturers, as well as
the instructions in this manual.
The safety information in this manual is denoted by the
safety alert symbol:
This symbol means ATTENTION! BECOME ALERT!
YOUR SAFETY IS INVOLVED!
The level of risk is indicated by the following signal
words:
2.2 Operational Hazards
Carefully read all safety messages in this manual and
on equipment safety signs. Keep safety signs in good
condition and replace missing or damaged safety
signs.
New equipment components and repair parts must
include the current safety decal.
Learn how to properly operate equipment. NEVER
operate or work around this equipment without proper
instruction, while fatigued or under the influence of
alcohol, prescription or non-prescription medication or
if feeling ill.
Keep your equipment in proper working condition.
Know the regulations and laws that apply to you and your
industry. This manual is not to replace any regulations
or laws. Additional information may be found at:
www.nfpa.org or www.osha.gov.
If you do not understand any part of this manual, contact
Imperial Systems, Inc. at 724-662-2801.
imperialsystemsinc.com 7 Imperial Systems Inc.
DANGER
DANGER - Indicates a hazardous situation,
which, if not avoided, WILL result in death
or serious injury.
WARNING
WARNING - Indicates a hazardous
situation, which, if not avoided, could
result in death or serious injury.
CAUTION
CAUTION - Indicates a hazardous situation,
which, if not avoided, could result in minor
or moderate injury.
NOTICE
NOTICE - Indicates a situation that could
result in damage to the equipment
or other property.
WARNING
Prevent serious injury or death.
Read and understand this manual before
operating equipment.
WARNING
Prevent serious injury or death
from moving parts.
Moving parts can crush and dismember.
Do not operate without guards
and shields in place.
Disconnect and lockout power source
before adjusting or servicing.