23
Option 2: Two-Click Exposure
1. With all devices turned off, connect and secure the receiving (on-camera) transceiver
to the camera by plugging the camera dedicated shutter release cable into the Camera
remote [
] port and the other 3.5mm end into the transceiver’s output [
].
2. Turn on your camera and set it to Bulb.
3. Turn on the on-camera transceiver and set to Receiver (Rx) mode using the M button and
bulb mode by holding the Bulb Mode button. The LCD display will display a “B” symbol
when the function is activated.
4. Turn on the transmitting (in-hand) transceiver and set it to Transmitter/Receiver (Tx/Rx)
mode using the M button and Bulb (B) mode using the Bulb button. The LCD display will
continuously flash a “B” to indicate when the function has been activated.
5. Synchronize the group and channel selection on both devices.
6. Half-press the Shutter Release button to auto-focus the camera.
7. Push the Shutter Release button to open the camera’s shutter. A synchronized timer will
appear on both transceiver screens indicating the elapsed time.
8. Push again to close the camera’s shutter.
9. Push Bulb button twice to turn off “B” mode.
