22
Using Your Transceiver as a Shutter Release
Using Wireless Bulb Mode
Option 1: Press/Hold Exposure
1. With all devices turned off, connect and secure the receiving (on-camera) transceiver
to the camera by plugging the camera dedicated shutter release cable into the Camera
remote [
] port and the other 3.5mm end into the transceiver’s output [
].
2. Turn on your camera and set it to Bulb.
3. Turn on the on-camera transceiver and set it to Receiver (Rx) mode using the M button.
4. Turn on the in-hand transceiver and set it to Transmitter (Tx) mode using the M button.
5. Synchronize the group and channel selection on both devices.
6. Half-press the Shutter Release button to auto-focus the camera.
7. Using the in-hand transceiver, push and hold the Shutter Release button to open the
camera’s shutter.
8. Release the button when the desired exposure time has elapsed.
