iMotion SC111, Руководство пользователя

Страница: 91 / 260

iWaylink Inc.
91
B9 is the “Send all characters up to a string” command 0002 is the length of
the string (2 characters)
41 is the hex value for A
42 is the hex value for B
BA is the “Insert a string” command
0002 is the length of the string to be added (2 characters) 2A is the hex value
for an asterisk (*)
2A is the hex value for an asterisk (*)
F1
is the “Send all characters” command 0D is the hex value for a CR
The data is output as:
1234567890**ABCDEFGHIJ
<CR>
B3 - Insert symbology name
Insert the name of the barcode
’s symbology in the output message, without
moving the cursor. Only symbologies with a Honeywell ID are included (see
Symbology Charts on page A-1). Refer to the ASCII Conversion Chart (Code
Page 1252), beginning on page A-3 for decimal, hex and character codes.
B4 - Insert barcode length
Insert the barcode
’s length in the output me
ssage, without moving the cursor.
The length is expressed as a numeric string and does not include leading
zeroes.
B3 and B4 Example: Insert the symbology name and length
Send the symbology name and length before the barcode data from the
barcode above. Break up these insertions with spaces. End with a carriage
return.
Command string: B3F42001B4F42001F10D
B3 is the “Insert symbology name” command