iMotion SC111 Скачать руководство пользователя страница 177

Страница: 177 / 260

iWaylink Inc.

177

6-31 GS1 Emulation

The scanner can automatically format the output from any GS1 data carrier to

emulate what would be encoded in an equivalent GS1-128 or GS1 DataBar

symbol. GS1 data carriers include UPC-A and UPC-E, EAN-13 and EAN-8,

ITF-14, GS1-128, and GS1-128 DataBar and GS1 Composites. (Any

application that accepts GS1 data can be simplified since it only needs to

recognize one data carrier type.)

GS1-128 Emulation

is scanned, all retail codes (U.P.C., UPC-E, EAN8,

EAN13) are expanded out to 16 digits. If the AIM ID is enabled, the value will

be the GS1-128 AIM ID, ]C1 (see Symbology Charts).

GS1 DataBar Emulation

is scanned, all retail codes (U.P.C., UPC-E, EAN8,

EAN13) are expanded out to 16 digits. If the AIM ID is enabled, the value will

be the GS1-DataBar AIM ID, ]e0

(see Symbology Charts).

GS1 Code Expansion Off

is scanned, retail code expansion is disabled, and

UPCE expansion is controlled by the UPC-E0 Expand setting. If the AIM ID is

enabled, the value will be the GS1-128 AIM ID, ]C1.

EAN8 to EAN13 Conversion

is scanned, all EAN8 barcodes are converted

to EAN13 format.

Default = GS1 Emulation Off

GS1-128 Emulation

GS1 DataBar Emulation

Содержание SC111





































































































































































































































































Результаты поиска

Содержание SC111

Отзывы:

iMotion SC111, Руководство пользователя, Страница: 177 / 260

Результаты поиска

Содержание SC111

Отзывы: