AC
G
8 2
01
8.
01
e
n-
G
B
, I
D
-No
.: 1
63
-0
43
/A
www.imo.se
22
H.
• Mount the washer 124A and slide on the circlip
124 with a suitable plier on the power rotor
1020.
• Mount the key 113 on the power rotor 1020.
E.
• Attach the outer magnet rotor 005D to the
coupling half 998 and tight the screws 006A ac-
cording to the tightening torque table on page
17 in this manual.
F.
• Attach the connecting frame 003 to the electri-
cal motor 002 by means of tightening the bolts
702 according to the tightening torque table on
page 17 in this manual.
G.
• Mount the ball bearing 122 on the power rotor
1020 with the mounting tool described on page
8, use a threaded pin together with a nut and a
washer and press down the ball bearing on the
shaft carefully. Note: in order to make the ball
bearing to slide on easier it is recommended to
grease the shaft surface.
