AC
G
8 2
01
8.
01
e
n-
G
B
, I
D
-No
.: 1
63
-0
43
/A
www.imo.se
16
Dismantling
A.
• Turn the electricity OFF.
• Close the valves.
• Disconnect the electric motor.
• For horizontal installation drain the pump by
loosen screws 453 3-4 turns and loosen valve
housing 480.
B.
• Remove the 4 bolts 701 and the washers 701A
C.
• Mount the first half of the 4 guide pins which
comes in two parts through the pumps front
cover into the connecting frame.
• Attach the dismantling bolts and slowly start to
tight them until the pump is separated from the
electrical motor.
• Continue to tight the bolts while making sure
that the pump and the electric motor with its
connecting frame is in a straight line with each
other.
D.
• Mount the extension guide pins when it is pos-
sible and continue to separate the pump from
the electrical motor in an straight line in order to
avoid damages on the magnets.
• The use of a strap or similar devices on the
electrical motor in order to stabilize and secure
the package from the magnetic force is recom-
mended.
