AC
G
8 2
01
8.
01
e
n-
G
B
, I
D
-No
.: 1
63
-0
43
/A
www.imo.se
21
B.
• Measure the distance in order to get the same
as before the coupling was removed.
D.
• Tight the looking bolt 998B with a suitable hex-
agon key
A.
• Mount the coupling half 998 onto the drive
shaft of the electrical motor by means of a big
washer and a threaded pin and a nut that is
tightened in order to press the coupling half
onto the shaft.
NOTE: Do not use a hammer as this can Dam-
age the shaft!
Reassembly
C.
