Immersion RC Vortex 230 Mojo, Быстрый старт

Страница: 13 / 17

All​ ​Done,​ ​Time​ ​To​ ​Fly
At​ ​this​ ​point​ ​in​ ​the​ ​Getting​ ​Started​ ​manual,​ ​the​ ​Vortex​ ​should​ ​be​ ​ready​ ​for​ ​its​ ​maiden​ ​flight.
The​ ​Wizard​ ​has​ ​setup​ ​the​ ​flight​ ​controller​ ​with​ ​our​ ​default​ ​Pro-Tune,​ ​generated​ ​by​ ​one​ ​of​ ​our​ ​expert​ ​team
pilots.​ ​PIDs​ ​and​ ​gains​ ​are​ ​unlikely​ ​to​ ​require​ ​major​ ​changes​ ​to​ ​achieve​ ​precise​ ​flight.
If​ ​the​ ​props​ ​were​ ​removed​ ​during​ ​setup​ ​(as​ ​we​ ​highly​ ​recommend),​ ​​ ​please​ ​re-install​ ​taking​ ​care​ ​of​ ​the​ ​prop
directions​ ​below:
P.S.​ ​To​ ​arm​ ​the​ ​flight​ ​controller​ ​after​ ​running​ ​the​ ​wizard,​ ​for​ ​mode​ ​2,​ ​move​ ​the​ ​throttle​ ​stick​ ​down​ ​and
to​ ​the​ ​right.​ ​See​ ​‘Flight​ ​Controller​ ​Stick​ ​Commands’​ ​in​ ​the​ ​main​ ​manual.
The​ ​ImmersionRC​ ​Team​ ​wishes​ ​you​ ​many​ ​hours​ ​of​ ​enjoyment​ ​with​ ​your​ ​new​ ​mini-quad,​ ​and​ ​welcome​ ​any
feedback​ ​that​ ​you​ ​may​ ​have​ ​at:​ ​​
feedback@immersionrc.com
The​ ​Getting​ ​Started​ ​Manual​ ​should​ ​have​ ​got​ ​you​ ​airborne.​ ​It​ ​is​ ​a​ ​good​ ​idea​ ​to​ ​read​ ​the​ ​full​ ​instruction
manual​ ​also,​ ​which​ ​contains​ ​many​ ​more​ ​details​ ​than​ ​this​ ​Quick​ ​Start​ ​Quide.
Spares​ ​and​ ​Repairs
As​ ​with​ ​any​ ​mini-quad,​ ​the​ ​first​ ​items​ ​likely​ ​to​ ​break​ ​on​ ​your​ ​Vortex​ ​are​ ​the​ ​props.
The​ ​props​ ​shipped​ ​with​ ​your​ ​Vortex​ ​230​ ​Mojo​ ​are​ ​HQ​ ​5x4.3x3​ ​V1S,​ ​a​ ​common​ ​and​ ​popular​ ​5”​ ​propeller​ ​for
mini-quads​ ​available​ ​in​ ​an​ ​assortment​ ​of​ ​colors​ ​at​ ​most​ ​retailers​ ​and​ ​online​ ​shops.
If​ ​you​ ​do​ ​happen​ ​to​ ​break​ ​other​ ​parts​ ​of​ ​the​ ​Vortex,​ ​part​ ​numbers​ ​for​ ​spare​ ​parts​ ​may​ ​be​ ​found​ ​on​ ​the
ImmersionRC​ ​website,​ ​on​ ​the​ ​Vortex​ ​230​ ​Mojo​ ​product​ ​page.
13