Immergas Zeus Superior, Руководство пользователя

Страница: 26 / 52

24
STZSkW ed 12/07 ZEUS Superior kW
Technical Documentation Technical Documentation
Electric circuit.
D.H.W. mode.
Operating.
By pressing the master switch ( ) boiler activation is enabled,
which is enabled for functioning in the domestic hot water
phase.
If the temperature detected by the DHW NTC probe (B2)
is lower than the setting made on the control panel (or on the
CAR or Super CAR if mounted) and if the contact of the system
pressure switch (S5) is closed (pressure detected in the primary
circuit above the minimum valve) , the integrated P.C.B. powers
the boiler pump (M1) through relay K3, after which by diver-
sion of the contact of the relay K1 it powers the motor (M) of
the 3-way valve (M30). This functions until the end run switch
"3" opens on arrival at the domestic hot water position.
If the flue flow meter (B7) sends a correct signal to the board
(equivalent to fan at standstill or flue flow meter connected)
the fan is powered (M20) by means of relay K4.
With the consent of the safety thermostat (E4) and if the flue
flow meter (B7) send a correct dignal to the board (equivalent
to fan operating), the P.C.B. excites the requested relay K2,
which causes the closure of the two contacts. This allows to
start the controlled ignition cycle, firstly the ignition electrodes
(E1) and successively, both gas valve coils (Y1).
Ignition of the burner is detected by the P.C.B. by means of
the ionization electrodes (E2).
%0.&45*$)0
5
8
"5&3
)&"
5*/(
-0(*$$0.."/%4.*$3
013
0$&4403
7&3:-0870-5"(&4"'&5:$*3$6*5
461&3$"3
015*0/"-
;0/&
#0"3%
015*0/"-
*.(#64
$0//&$5*0/
3&-":#0"3% 015*0/"-
$0//&$5*0/'037*3(*-*0
)"/%)&-%$0/530-1"/&-
4503"(&5"/,
$0/'*(63"
5*0/+6.1&3
.*$30130$&4403
130(3"..*/($0//&$503
4&"-&%
$0/'*(63"
5*0/+6.1&3