ImmediaTV ITV-IP360c, Руководство пользователя

Страница: 64 / 93

64
No changes to Apply
Configuration Changed
In general, most changes will cause the encoder channel to stop and start again, causing a brief
(2-second) interruption to the stream. Changes to the following parameters are implemented on-
the-fly, without stopping the encoder:

Audio Source in Basic Tab – Audio Configuration

Language Code in Basic Tab – Audio Configuration

Any CC/AFD configurations made in Advanced Tab – VBI/Ancillary Data Insertion

Audio Gain L/R in Analog Audio Parameters

Audio Mute L/R in Analog Audio Parameters

Audio Type and Dolby PMT Type in PMT Information
Encoder Statistics Tab
The Encoder Statistics Tab is divided into four lower tabs, as indicated below:
The Basic , Advanced and Output tabs are direct equivalents of their configuration counterparts.
They present the current value of each of the configuration parameters. When the Apply/Cancel
buttons are grayed out, the contents of these tabs exactly match their configuration counterparts.
When the
Apply/Cancel buttons are active, configuration parameters may have been changed.
The current (running) encoder configuration can still be inspected in the statistics tabs, prior to
clicking on the
Apply button.
The
Status Tab provides a summary of the current status of the encoder. It is divided into two
areas, the Encoder Status area and the Output Status area. The Encoder Status area reflects the
current status of the encoding subsystem, and the Output Status area reflects the status of the
network output subsystem. Both areas change depending on the individual subsystem settings.
Encoder Subsystem
Status
Network Output
Status