61
that, depending on the service, the
app
field may contain a complete path or even a set of
parameters.
The IP360 encoder can be configured with primary/backup RTMP servers. If it cannot connect
to the primary server, it will automatically try the backup.
The RTMP configurable parameters are:
RTMP Protocol:
Select the protocol variant, as discussed above.
Primary Server:
Enter the host name or IP address of the primary (or single) RTMP
server to be contacted. If you want to use host names instead of IP addresses, make sure
to configure at least one DNS server. DNS servers may be configured in the Network
Configuration DNS Tab. In the ITV-IP360c, DNS servers can also be configured in the
Control Port Configuration Tab or obtained by DHCP.
Primary Network Interface:
Select the network interface to be used when contacting
the primary server. The settings are:
o
Any:
use the “best” network interface to connect to the server. In the ITV-IP360c,
this setting allows the encoder to use the control Ethernet port to connect to the
RTMP server, if appropriate.
o
Ethernet 1:
preferably use Ethernet 1 to connect to the server. If the server is not
in the same subnet as Ethernet 1, and no default gateway is set for Ethernet 1, this
setting will be ignored.
Содержание ITV-IP360c
Страница 25: ...25 Statistics Panel Configuration Panel Reflected in the front Status LED...
Страница 89: ...89...
