IMKO TRIME-GW Series, Руководство пользователя

Страница: 20 / 40

20
In the menu "Calibration" and the window "Material Property Calibration" the calibration curves CAL1 to Cal15
which are stored in the SONO probe are loaded and displayed on the screen (takes max. 1 minute). With the
mouse pointer individual calibration curves can be activated and tested with the SONO-probe by activating the
button "Set Active Calib". Furthermore, the individual calibration curves CAL1 to Cal15 can be adapted or modified
with the calibration coefficients (see Chapter “Creating a linear calibration curve”).
The desired and possibly altered calibration curve (Cal1. .15) which is activated after switching on the probes
power supply can be adjusted with the button
"Set Default Calib”.
The calibration name can be entered in the window “Calibration Name”.
The coefficients m0 to m1 (for linear curves) and m0 to m5 (for non-linear curves) can be entered and adjusted
directly by hand with the buttons
“Set”
and
“Save”
. Possible are non-linear calibration curves with polynomials
up to fifth order (m0-m5).
Attention:
Use “dot” as separator not comma, for coefficients m0 to m5!