800-WMAGNET
19 of 21
WARNING
Disassembly or repair of this magnet can result in reduced holding power
and/or cause an unsafe condition. Therefore, anytime the magnet is dis-
assembled beyond the parts list shown in this manual, the magnet must
be re-tested for breakaway force in accordance with the test described in
ANSI/ASME B30.20.
Modifi cation of any operating mechanism or structure of this magnet can
reduce the magnet’s effectiveness and/or cause unsafe conditions.
Repair or modifi cation of this magnet should only be performed by Walker
Magnetics.*
For repair of a CER lift magnet, contact Walker Magnetics for the nearest Authorized Service
Center TOLL FREE at 1-800-W-MAGNET. A return material authorization number will be
issued along with the address of the nearest Service Center. The magnet, after receipt by
the Service Center will be inspected and a free estimate of repair charges will be provided.
Authorization for repairs from magnet owners must be given to the Walker Magnet Service
Center before repairs are made. Transportation charges, both to and from the factory, are to
be paid by the magnet owner.
* Walker replacement parts may be installed by a **Designated Person.
** Designated Person: A person selected or assigned by the employer as being
competent to replace specifi c replacement parts listed in this manual and is
able to verify the proper functioning of the specifi c replacement parts and the
entire product after the completion of the installation.
This product is manufactured in accordance with ANSI/ASME B30.20
For further information, refer to Chapter 20-3 Close Proximity Operated Lifting Magnets
REPAIRS
