8
Electronic Pressure Sensor 34D
Operation manual
7503756000000050 05/2019
4.4 IO-Link General Information
This unit has an IO-Link communication interface which requires an IO-Link-capable module (IO-
Link master) for operation.
The IO-Link interface enables direct access to the process and diagnostic data and provides the
possibility to set the parameters of the unit during operation.
In addition communication is possible via a point-to-point connection with a USB adapter cable.
Device-specific Information
You can find the IODDs necessary for the configuration of the IO-Link unit and detailed information
about process data structure,
Diagnostic information and parameter addresses at http://s.norgren.com/34d
Parameter setting tools
You will find all necessary information about the required IO-Link hardware and software at
http://s.norgren.com/34d
5. Installation
Before installing and removing the unit: Make sure that no pressure is applied to the system.
►
Insert the unit in a G¼ process connection.
►
Tighten firmly.
Recommended tightening torque: 25 to 35 Nm
