18
Electronic Pressure Sensor 34D
Operation manual
7503756000000050 05/2019
9.4.4 Read min-/max values for the system pressure
►
Select [HI] or [Lo] and briefly press [●]. [HI] = maximum value, [LO] = minimum
value. Delete memory:
►
Select [HI] or [LO].
►
Press and hold [▲] or [▼] until [
----
] is displayed. ► Briefly press [●].
9.4.5 Reset all parameters to factory setting
►
Select [rES].
►
Press [●].
►
Press and hold [▲] or [▼] until [
----
] is displayed. ► Briefly press [●].
We recommend noting down your own settings before carrying out a reset
(→ 12 Factory setting).
9.4.6 Set colour change of the display
►
Select [coLr] and set the function:
- [rEd] = display colour red (independent of the measured value).
- [GrEn] = display colour green (independent of the measured value).
- [r1ou] = display colour red when OUT1 switches
- [G1ou] = display colour green when OUT1 switches.
- [r2ou] = display colour red when OUT2 switches.
- [G2ou] = display colour green when OUT2 switches.
- [r-12] = Display colour red when the measured value is between
the limit values of OUT1 and OUT2.
- [G-12] = Display colour green when the measured value is between
the limit values of OUT1 and OUT2.
- [r-cF] = Display colour red when the measured value is between
the freely definable limit
)
values
[cFL]
)
*) and [cFH]*).
- [G-cF] = Display colour green when the measured value is between
the freely definable limit values
[cFL]
)
*) and [cFH]*).
)
*
)
*) The parameters [cFL] and [cFH] can only be selected in the menu tree when [r-
cF] or [G-cF] were activated.
►
Select [cFL] and set the lower limit value
(only possible when [r-cF] or [G-cF] were activated).
> The setting range corresponds to the measuring range and its maximum limit is
[cFH].
►
Select [cFH] and set the upper limit value.
(only possible when [r-cF] or [G-cF] were activated).
> The setting range corresponds to the measuring range and its minimum limit is
[cFL].
