IMI PNEUMATEX Pleno PI 6.1, Руководство по установке

Страница: 69 / 100

69 69
de
fr
en
nl
1) 2) 3)
4)
Operation -
Messages
View and acknowledge messages
Deviations from selected parameter settings and from the parameters calculated by
BrainCube, but operating information is also shown as codes on the bottom line of the
display. If a current message is present, use
push
to open the message list.
Use
push
to open the message list.
Use
scroll
to select messages.
Use
push
to open the Help text, and acknowledge with
push
if prompted.
Fault messages
Please refer to the terminal plan, particularly for fault messages M15-M19
:
page 64.
Are all devices connected correctly, are the fuses ok?
If full functionality cannot be restored, please contact IMI Hydronic Engineering’s Customer Service.
The last 20 messages are displayed.
The message list can also be opened from
the menu - Info .
push
scroll
If there is a technical fault, certain functions may
be locked. After the fault is corrected, the message
is either acknowledged automatically, or you are
prompted to acknowledge it.
Correct all faults, otherwise fault concatenations may
occur.
LED flashes if messages
are present
1) Low water protection LS_ has been
actuated.
:
M05, M06 page 59
2) External water make up signal LS
ext
registered.
3) Key lock activated.
:
page 56
4) «EXT» is indicated if the TecBox
is not pressure-dependent but is
actuated via an external water
make-up signal LS
ext
for ensuring
the water make-up.
:
pages 58 | 66