10
Deutsch
Deutsch Seite
Français
Français Page
Italiano
Italiano Pagina
Nederlands
Nederlands Pagina
Español
Español Página
Polski
Polski Strona
1 Applications
The spotlight PARC-100E / RGB with RGB COB*
LED is used for effect illumination, e . g . on stage
or in function rooms . If offers various operating
modes (e . g . static light, stroboscope light, auto-
matic change of colour) . The spotlight is equipped
with barn doors which can be used to adjust the
beam as required .
The spotlight is designed for control via a DMX
light controller (10 or 5 DMX control channels), but
it can also be operated without a DMX controller,
either independently or in combination with ad-
ditional PARC-100E / RGB spotlights (master / slave
mode) .
* COB (Chip on Board): Many individual LED semiconductor
chips are densely packed on a PCB to provide a uniform
light distribution .
2 Safety Notes
The unit corresponds to all relevant directives of
the EU and is therefore marked with .
WARNING
The unit uses dangerous mains volt-
age . Leave servicing to skilled per-
sonnel and do not insert anything
into the air vents . Inexpert handling
may result in electric shock .
•
The unit is suitable for indoor use only . Protect it
against dripping water, splash water and high air
humidity . The admissible ambient temperature
range is 0 – 40 °C .
•
Do not place any vessels filled with liquid, e . g .
drinking glasses, on the unit .
•
Immediately disconnect the mains plug from the
socket if
1 . the unit or the mains cable is visibly damaged,
2 . a defect might have occurred after the unit
was dropped or suffered a similar accident,
3 . malfunctions occur .
In any case, the unit must be repaired by skilled
personnel .
•
A damaged mains cable must be replaced by
skilled personnel only .
•
Never pull the mains cable to disconnect the
mains plug from the socket, always seize the plug .
•
For cleaning the housing, only use a dry, soft
cloth; never use water or chemicals . For clean-
ing the clear plastic in front of the LED, a mild
detergent may be used . Always disconnect the
mains plug before cleaning .
•
No guarantee claims for the unit and no liability
for any resulting personal damage or material
damage will be accepted if the unit is used for
other purposes than originally intended, if it is
not correctly installed or operated, or if it is not
repaired in an expert way .
•
Important for UK Customers!
The wires in this mains lead are coloured in
ac cord ance with the following code:
green / yellow = earth
blue = neutral
brown = live
As the colours of the wires in the mains lead
of this appliance may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows:
1 . The wire which is coloured green and yellow
must be connected to the terminal in the plug
which is marked with the letter E or by the
earth symbol , or coloured green or green
and yellow .
DMX LED Spotlight
These instructions are intended for installers of the
unit and for users with basic knowledge in DMX
control . Please read the instructions carefully prior
to operation and keep them for later reference .
Contents
. . . . . . . . . . . . . . . .
3.1 Mounting / Setting up the spotlight
3.2.1 Connection to a DMX controller
. . . . . . . . . . . . . . . .
4.2 Operation with a DMX controller
4.3 Operation without DMX controller
English
English Page
