25
EN
• Unpack the appliance and remove any inserts or adhesive labels from the product.
• Remove the protective cover from the ice crushing blade and the blade for chopping and kneading.
•
Carefully wash all removable parts in contact with food (indicated as follows) by hand, using hot water
and washing up liquid:
ܞ
the measuring cup, the lid, the lid seal, the spatula, the mixing blade and the steaming basket.
ܞ
the blade for chopping and kneading and the ice crushing blade – use a toothbrush and hold the
blades at the top to avoid cutting yourself.
ܞ
the bowl – taking care not to wet the underside of the bowl where the contacts are. If the contacts
accidentally get wet, dry them thoroughly with a cloth before putting the bowl back on the bowl
mounting.
• Clean the base of the product and the bowl mounting with a damp cloth that has been thoroughly
wrung out, taking care not to wet the area where the bowl connector is.
• Dry all washed parts thoroughly.
ASSEMBLY
• Place the base of the product on a stable and smooth level
surface, at a safe distance from any edges to prevent the risk of it
falling during use. Ensure that the suction pads adhere securely
to the underlying surface.
• Put the bowl in the bowl mounting by pushing it down until it
clicks into place.
•
Fit the suitable accessory for the required process:
ܞ
the blade for chopping and kneading or the ice crushing blade
(hold the blade at the top to avoid cutting yourself, and fit it on the
helical drive spindle).
ܞ the whisk (fitting it directly onto one of the blades).
