E210501X rev.1_ENG
16/11/2021
44
customer is using.
o
INCREASE VALUE FOR SALE (only for self-service machines): This is the cost of the time
increase defined above.
-
SPECIFIC PARAMETERS FOR MACHINES EQUIPPED WITH SPEED REGULATION: the following
parameters are visible only on machines equipped with a speed controller to the basket motor or fan
motor:
o
BASKET SPEED (only for machines with basket speed control): It is the speed of rotation of the
basket, expressed the n revolutions per minute.
o
FAN SPEED (only for machines with speed control ventilator): It is the speed of rotation of the
fan, expressed in Hertz.
-
PARTIALIZED POWER (only for machines with electric heating and equipped with the optional
partialized power): Consent to decide if and how to reduce the heating power made available by the
heating body. It is possible to control three different heating powers:
o
MIN (1stset of resistors)
o
MED (2ndset of resistors)
o
MAX (1°+ 2nd set of resistors)
50. PROGRAMMING: ANTI-WRINKLE
Allows you to activate, deactivate or modify the anti-wrinkle phase.
The parameters that are changed in this submenu are:
-
ANTIGRINZE: can take the values:
o
PRESENT: it means that the anti-wrinkle phase will be activated after the end of the cycle, if the
porthole is not opened, according to the values defined below
o
ABSENT: means that the anti-wrinkle phase will not be activated after the end of the cycle, even
if the porthole is not opened
-
END OF CYCLE BREAK: it is the waiting time after the end of the cycle, expressed in minutes and seconds,
after which the anti-wrinkle phase is activated.
-
NEXT: is the time of rotation of the basket, clockwise, expressed in minutes and seconds, during the anti-
wrinkle phase.
-
PAUSE: is the pause time of the basket, expressed in minutes and seconds, during the anti-wrinkle phase
between an hourly rotation and a counter clock.
-
BACK: is the rotation time of the basket, counterclockwise, expressed in minutes and seconds, during the
anti-wrinkle phase.
-
MAX CYCLE TIME: it is the duration of the anti-wrinkle phase before the final stop of the cycle or before
the door is opened.
51. PROGRAMMING: DRYER WITH PAYMENT SYSTEM
For paid machines, access to programming is by turning on the machine and pressing the three points that
appear on the upper right corner of the screen. This button will only be present for 30 seconds after the machine
is turned on, after which it will disappear effectively preventing access to the password typing page.
In the event that the machine is equipped with a payment system, there are dedicated programmable
parameters, not present in the standard machines, described above.
The following parameters can be reached by consulting the REGISTRATIONS menu:
