12
CHAPTER FOUR:
HARDWARE CONFIGURATION
The following iMcV-FiberLinX features are hardware configurable only:
selecting management port, host/remote/standalone selection, and Half-
Duplex on the fiber port. The iMcV-FiberLinX includes the AutoCross fea-
ture which is hard-coded. You can also use the EXT MGMT port on iMcV-
FiberLinX as a serial port.
AutoCross Feature for Twisted Pair Connection
All twisted pair ports on the iMcV-FiberLinX include AutoCross, a feature
that automatically selects between a crossover workstation or pass-through
connection depending on the connected device. A MDI/MDIX button is
not required.
DIP Switch Settings
Before installing the
iMcV-FiberLinX,
set all features which are hardware-
configurable. Use the DIP switches, located at position S1 on
iMcV-
FiberLinX,
for configuration.
S
WITCH
F
UNCTION
D
EFAULT
1
SNMP on EXT MGMT port
ON
2
SNMP on DATA port
OFF
3
SNMP on OPTICS port
OFF
4
Half-Duplex on OPTICS port
OFF
5
Factory Use — Do not change
OFF
6
Basic Mode
ON
7
Remote Unit
OFF
8
Host Unit
OFF
Figure H: Dipswitch Settings
Содержание iMcV-FiberLinX
Страница 1: ...iMcV FiberLinX Operation Manual ...
Страница 2: ...Notes ...
